Post by Mango on Nov 20, 2015 13:39:50 GMT
Use CTRL + F to find your error.
Error code: -2147467259
You need to update your drivers OR disable your antivirus software.
Error code: 10093
1. Click Start then go to all programs, accessories, command prompt
2. Right click the command prompt and click 'Run as Administrator'.
3. On the command prompt box type netsh winsock reset
4. Press enter and restart your computer.
This is a problem with Windows Vista users.
Error 38
This error may happen randomly or you stayed in the cash shop for too long. Just start StubbornMS's client again.
Some skills might cause this error.
Server Check/Firewall
1. It is because the server is down or is restarting
2. If server is up and you have this error, try allowing StubbornMS in your firewalls/antivirus settings
3. You have been MAC banned
4. You are not connected to the internet.
Missing ijl15.dll
Re-install v83setup.
Also, check to see if the StubbornMS's client has been placed in your v83 folder.
Put StubbornMS's client in your v83 maple folder then run the client.
Can't get pass login
1. Run the client as an admin (for vista & win 7 users)
2. If other players can get online, disable your loopback adaptor.
3. If the problem still exists, wait for a server restart. (Server login is probably down)
Error Code -2147287038
This error is caused by a missing WZ file in your MapleStory v83 folder. This error also happens if you have custom files from other servers in your v83 folder. So just download the clean v83 wz files
Alternatively, reinstall maple. Go to control panel > programs & features > MapleStory > uninstall. Then reinstall using the downloads.
Account does not exist / Unregistered ID
Most common cause of this is because you installed v83 into the same folder where your GMS or other versions are saved.
Make a new folder on the desktop or wherever you want and name it something like Maplestory v83.
Then, install v83 into the new folder, put the StubbornMS's client in the folder you installed v83, and then login. If this doesn't work, your account might be deleted.
Error code: -2147024883 (The data is invalid.)
Uninstall and reinstall Maplestory.
Disconnected after PIC
Your loopback adapter is on, use the steps below:
Windows XP Guide
Open "My Computer"
Right click on "My Computer" followed by click "Properties"
Click on the "Hardware" tab and then click "Device Manager"
Click the "+" sign next to Network Adapters
Click on Microsoft Loopback Adapter, followed by click delete button
Then a confirmation pop up will open, Choose OK.
Open StubbornMS's client and it should work.
Windows 7 & Vista Guide
Open your control panel
Click on Network and Internet
Click on Network and Sharing Center
On the left side there is a "change adapter settings" link, click it (For Vista users this is a Manage Network Connections)
There should be several "local area network" icons, disable them.
OR It could be a MAC ban
(Unknown error 0x800300002) Error code : -2147287038
Redownload StubbornMS's wz files.
Error code: -2005532292 (unknown error 0x8876017C)
1) Disable your firewall.
2) Restart StubbornMS
3) If step 1 fails, uninstall your firewall program.
4) Restart your computer, then launch StubbornMS
5) If unsuccessful, install a different firewall program.
Blackscreen Fix
Solution 1:
1. Find StubbornMS in your folder and right click it.
3. Click on 'Properties'.
4. In the menu choose 'compatibility' click on 'Settings for users' (or something like that, it should be at the bottom above the 'OK' button).
This will open a new screen on top of your properties, then find the Check box under 'Compatibility Mode'
5. Put the thing under it on 'Windows XP (Service pack 2)'
6. Run as Administrator and Press 'OK'.
Solution 2:
1. Go to 'Processes'
2. Find StubbornMS in the list and right click it
3. Click on Priority
4. Change it to realtime(/high might work too)
(If you get a note that you cannot change it, go to Computer> C: > Windows > System 32 > Taskmgr.exe
Right click Taskmgr.exe and run as admin
Once you did this you should be able to change the priority)
'MapleStory has stopped working'
Fix:
Try to run it with compatibility mode, and try running it as admin.
Redownload v83 completely, and redownload StubbornMS's client.
If that still doesn't work then I suggest you reset your whole computer.
This only happened with VISTA users.
Error -2147024809 (The parameter is incorrect.)
Right click on the client and click properties > compatibility tab.
Change the settings : Compatibility mode > Windows 7.
Reduced color mode checked and 8-bit 256 color.
Privilege level > run this program as administrator and click apply.
You might need to close Skype completely and then open up StubbornMS.
You may open Skype after StubbornMS had launched.
Windows 8/8.1/10 Error (Compatibility issue)
1. Right click the StubbornMS.exe
2. Click on 'Properties'
3. In the 'Attributes' section, tick 'Read-only'
4. Click on the 'Compatibility' tab
5. Check 'Run this program in compatibility mode for:" and pick from either Windows 98/ Windows Me / Windows XP (Service Pack 2)/ Windows XP (Service Pack 3)/ Windows 7
6. Check 'Run this program as an administrator'
7. Click 'Apply'.
Error code: -2147467259
You need to update your drivers OR disable your antivirus software.
Error code: 10093
1. Click Start then go to all programs, accessories, command prompt
2. Right click the command prompt and click 'Run as Administrator'.
3. On the command prompt box type netsh winsock reset
4. Press enter and restart your computer.
This is a problem with Windows Vista users.
Error 38
This error may happen randomly or you stayed in the cash shop for too long. Just start StubbornMS's client again.
Some skills might cause this error.
Server Check/Firewall
1. It is because the server is down or is restarting
2. If server is up and you have this error, try allowing StubbornMS in your firewalls/antivirus settings
3. You have been MAC banned
4. You are not connected to the internet.
Missing ijl15.dll
Re-install v83setup.
Also, check to see if the StubbornMS's client has been placed in your v83 folder.
Put StubbornMS's client in your v83 maple folder then run the client.
Can't get pass login
1. Run the client as an admin (for vista & win 7 users)
2. If other players can get online, disable your loopback adaptor.
3. If the problem still exists, wait for a server restart. (Server login is probably down)
Error Code -2147287038
This error is caused by a missing WZ file in your MapleStory v83 folder. This error also happens if you have custom files from other servers in your v83 folder. So just download the clean v83 wz files
Alternatively, reinstall maple. Go to control panel > programs & features > MapleStory > uninstall. Then reinstall using the downloads.
Account does not exist / Unregistered ID
Most common cause of this is because you installed v83 into the same folder where your GMS or other versions are saved.
Make a new folder on the desktop or wherever you want and name it something like Maplestory v83.
Then, install v83 into the new folder, put the StubbornMS's client in the folder you installed v83, and then login. If this doesn't work, your account might be deleted.
Error code: -2147024883 (The data is invalid.)
Uninstall and reinstall Maplestory.
Disconnected after PIC
Your loopback adapter is on, use the steps below:
Windows XP Guide
Open "My Computer"
Right click on "My Computer" followed by click "Properties"
Click on the "Hardware" tab and then click "Device Manager"
Click the "+" sign next to Network Adapters
Click on Microsoft Loopback Adapter, followed by click delete button
Then a confirmation pop up will open, Choose OK.
Open StubbornMS's client and it should work.
Windows 7 & Vista Guide
Open your control panel
Click on Network and Internet
Click on Network and Sharing Center
On the left side there is a "change adapter settings" link, click it (For Vista users this is a Manage Network Connections)
There should be several "local area network" icons, disable them.
OR It could be a MAC ban
(Unknown error 0x800300002) Error code : -2147287038
Redownload StubbornMS's wz files.
Error code: -2005532292 (unknown error 0x8876017C)
1) Disable your firewall.
2) Restart StubbornMS
3) If step 1 fails, uninstall your firewall program.
4) Restart your computer, then launch StubbornMS
5) If unsuccessful, install a different firewall program.
Blackscreen Fix
Solution 1:
1. Find StubbornMS in your folder and right click it.
3. Click on 'Properties'.
4. In the menu choose 'compatibility' click on 'Settings for users' (or something like that, it should be at the bottom above the 'OK' button).
This will open a new screen on top of your properties, then find the Check box under 'Compatibility Mode'
5. Put the thing under it on 'Windows XP (Service pack 2)'
6. Run as Administrator and Press 'OK'.
Solution 2:
1. Go to 'Processes'
2. Find StubbornMS in the list and right click it
3. Click on Priority
4. Change it to realtime(/high might work too)
(If you get a note that you cannot change it, go to Computer> C: > Windows > System 32 > Taskmgr.exe
Right click Taskmgr.exe and run as admin
Once you did this you should be able to change the priority)
'MapleStory has stopped working'
Fix:
Try to run it with compatibility mode, and try running it as admin.
Redownload v83 completely, and redownload StubbornMS's client.
If that still doesn't work then I suggest you reset your whole computer.
This only happened with VISTA users.
Error -2147024809 (The parameter is incorrect.)
Right click on the client and click properties > compatibility tab.
Change the settings : Compatibility mode > Windows 7.
Reduced color mode checked and 8-bit 256 color.
Privilege level > run this program as administrator and click apply.
You might need to close Skype completely and then open up StubbornMS.
You may open Skype after StubbornMS had launched.
Windows 8/8.1/10 Error (Compatibility issue)
1. Right click the StubbornMS.exe
2. Click on 'Properties'
3. In the 'Attributes' section, tick 'Read-only'
4. Click on the 'Compatibility' tab
5. Check 'Run this program in compatibility mode for:" and pick from either Windows 98/ Windows Me / Windows XP (Service Pack 2)/ Windows XP (Service Pack 3)/ Windows 7
6. Check 'Run this program as an administrator'
7. Click 'Apply'.